BuildTak 3D Print Surface 235 x 235 mm

BuildTak 3D Printing Surface - 235 x 235 mm

BuildTak is a thin and durable plastic sheet that adheres to the print bed of FDM (Fused Deposition Modeling) 3D printers, providing an optimal surface for 3D printing. It replaces the need for blue painter’s tape and polyimide films like Kapton. Made from high-quality, heat-resistant materials, BuildTak provides a stable platform for 3D prints to adhere to while also making it easier to remove completed prints.

BuildTak Benefits

• Works perfectly with ABS, PLA, and other materials without needing to change the surface or use pretreatments like hairspray or acetone slurry.
• Easy installation on the print bed and clean removal without adhesive residue.
• Highly durable: With proper care, it can last for many hours, protecting the original print bed.
• Ensures excellent adhesion between the printed object and the surface, preventing curling and allowing easy removal once the print is finished.
• Patent-pending heat-resistant composition, capable of withstanding typical heated bed temperatures (110-125°C). BuildTak is made with UL-certified flame-resistant materials.
• BuildTak just works!

Main Features

• Compatible with ABS, PLA, HIPS, PET+, Brick, Wood, and Flexible (TPE) filaments. Nylon and t-glase (PETT) can also adhere when using a thin layer of washable glue stick.
• Easier installation than painter’s tape or films, with fewer risks of air bubbles.
• Protects the print bed, extending the lifespan of the original surface.
• Heat-resistant and reusable for multiple consecutive prints, eliminating the need to change the surface between different filament materials.
• Optimizes object adhesion during printing while ensuring easy removal without damage or residue.

Frequently Asked Questions (FAQ)

What is BuildTak?

BuildTak is an ideal 3D printing surface for FFF 3D printers. It is a superior alternative to painter’s tape or heat-resistant films like Kapton. BuildTak comes in pre-cut plastic sheets with a special texture and a heat-resistant adhesive backing.

Why is BuildTak better than painter’s tape and heat-resistant films?

Unlike Kapton and painter’s tape, BuildTak is more rigid, easier to apply, and reduces air bubbles. It is also more durable and offers better protection for the print bed.

How to install BuildTak?

1. Clean the print bed, making sure it is free of debris.
2. Trim the BuildTak sheet to fit your print bed (if necessary).
3. Peel off the adhesive backing and apply the sheet, smoothing it with a credit card or decal applicator.
4. Recalibrate the nozzle height so that it is approximately the thickness of a standard sheet of paper.

How to ensure BuildTak lasts as long as possible?

Use spatulas with rounded edges and avoid harsh solvents like acetone. Ensure the nozzle does not come into direct contact with the BuildTak surface.

Why is my print not sticking to BuildTak?

The nozzle is likely too far from the surface. Try lowering the nozzle height slightly and perform a test print.

Why is my print sticking too well and difficult to remove?

The nozzle might be too close to the surface. Try increasing the nozzle height slightly. For ABS prints, reheating the print bed can help release objects that are too firmly attached.

Which materials are compatible with BuildTak?

ABS, PLA, HIPS, PET+, Brick, Wood, and Flexible (TPE) filaments. For nylon and t-glase (PETT), applying a thin layer of washable glue stick can help with adhesion.

BuildTak is the perfect solution to improve your 3D printing experience, reducing adhesion issues and ensuring a smoother, more reliable printing process!