Magigoo Glide Original 250 ml 3D Printer Adhesive

Magigoo is the perfect adhesive to ensure solid adhesion for your 3D prints. Easy to use, it is designed to solve the common problem of the "first layer not sticking." Magigoo offers strong adhesion to the heated print bed, and the real magic happens when the print is ready: just wait for the glass plate to cool down and, with a simple gesture, remove the print! Moreover, Magigoo helps to prevent warping. Isn't that great? Whether you're a hobbyist or a professional, it is always rewarding to see a 30-hour print without warping, which comes off easily from the bed once cooled.

Ease of application on the print bed

Applying Magigoo is a breeze: shake, press, and apply. Simply spread it only on the active print area, no need to cover the entire surface. The release is simple: Magigoo's adhesive properties are designed to allow the 3D print to be removed once the build plate has cooled.

Although Magigoo lasts for over 100 average prints, if you want to remove it, just a bit of water will easily clean it off. It is odorless and safe, perfect for use in enclosed environments or educational labs, even with children.

Refill for your Magigoo Coater kit

This is a refill compatible with the Magigoo Coater kit. The Magigoo Coater is designed exclusively for FDM/FFF 3D printers, allowing you to apply a thin and adhesive layer on the print bed. Start by placing the applicator at the edge of the bed, and after attaching the new glue bottle, pump until you get glue spots on the applicator's surface. Then, move the applicator across the bed to evenly distribute the Magigoo adhesive, moving back and forth to get a smooth surface.

Technical Specifications:

• Bottle content: 250 ml
• Appearance: light yellow liquid
• Odor: light
• Viscosity: low/medium
• Solvent: water
• Decomposition: after prolonged exposure to temperatures above 120°C
• Non-toxic

Compatible with:

• PLA
• PETG
• HIPS
• ABS
• TPU
• 3D Printers: Ultimaker, Anisoprint, Apium, Wasp

Recommended bed temperature based on filament:

• ABS: 90-110°C
• PLA: 40-70°C
• PETG: 80-100°C
• HIPS: 90-115°C
• TPU: 30-60°C