Italiano 
There are no more items in your cart
Wasp 4070 HDP Industrial 3D Printer HDP
€21,000.00 €19,380.00
3D Printer WASP 4070 HDP large-format optimized for direct printing from granules, offering economic advantages and a wide range of industrial applications. WASP 4070 HDP is suitable for specialized industries, research institutes and design studios, as well as plastic recycling.
The 3D printer is equipped with advanced features such as vacuum printing plane control, a heated chamber, and support for recycled materials. Network connectivity enables remote control, while the VAC vacuum retention system simplifies printbed replacement, ensuring high-quality prints.
Wasp 4070 HDP
Industrial 3D Printer 400 x 600 mm
Vacuum Active
The VAC system allows the plate to be replaced in seconds, avoiding micromovements.
Thermal Stability
"Hot and Cold Technology" enables precise printing of thermoplastic materials through thermal control.
Wi-Fi Control
Network connection for control via mobile devices and camera to monitor prints remotely.
Print Granules
The WASP 4070 HDP extruder enables printing of various thermoplastic materials from granules up to 350g/h.
Key Features 3D Printer Wasp 4070 HDP
Printing Technology
HDP
Print volume Ø400 x 600 mm
Print resolution
±0.2 mm
Printing speed
500 mm/s
For the full data sheet
Display TFT touch da 7"
The user experience has been greatly enhanced by the adoption of a modern 7-inch TFT touch display. In addition, an LED bar located on the top of the printer facilitates remote monitoring of job progress.
HDP extruder
The Wasp 4070 HDP 3D printer is equipped with the High Definition Pellet (HDP) extruder, which is pneumatically loaded and is designed to extrude standard, engineering and recycled thermoplastics from granules, achieving a capacity of 350g/h.
Vacuum Active Control
The VAC (Vacuum Active Control) vacuum retention system is a key innovation. It enables the easy change of printing plates suitable for different materials, improving adhesion and simplifying the process of removing completed prints.
Active Hot Chamber
The WASP 4070 HDP 3D printer is equipped with a controlled chamber system up to 70°C and cooling with "Hot and Cold technology," thus ensuring accurate and optimal printing of technical thermoplastic materials. Insulation contributes to thermal-acoustic insulation.
Continuous Feeding
The 3D printer makes it possible to produce large prints economically using granules, which are a more cost-effective solution than filaments. A sensor detects the material and autonomously requests it to the main 5-liter reservoir, ensuring continuous, quality production.
Wi-Fi Connection
The WASP 4070 HDP printer offers the ability to connect to a network, allowing the printing process to be controlled and monitored from anywhere via devices such as smartphones, tablets and computers. This feature provides advanced and even remote management, offering greater flexibility and convenience.
Automatic leveling
Platen leveling is fully automated with the MESH system, simplifying the printing process and ensuring platen accuracy, helping to achieve high-quality prints without the need for complicated manual leveling.
Simplify3D
Each Wasp 4070 HDP 3D printer includes a license for Simplify3D software, which offers complete control over print settings, with default configurations optimized specifically for the Wasp 4070 HDP 3D printer.
Recycled materials
Experience a wide range of custom and official WASP recycled materials, including standard, engineering and specialty thermoplastics. This variety gives you the flexibility to choose the materials best suited for your 3D printing projects, ensuring high-quality results.
W4070HDP2
Data sheet
| Configuration | Delta |
|---|---|
| Printing Technology | HDP |
| Printing Width (mm) | 400 |
| Printing Depth (mm) | 400 |
| Printing Height (mm) | 600 |
| Printing Resolution (mm) | ± 0,2 |
| Extruder number | Single |
| Print Speed recommended (mm/s) | 500 |
| Ambient Operating Temperature (°C) | 8 / 40 |
| Operational Nozzle Temperature (°C) | ≤280 |
| Operational Hot Bed Temperature (°C) | ≤120 |
| Reading code | GCode |
| Input formats | .OBJ / .STL |
| Connection mode | LAN / Wi-Fi / USB |
| Input voltage (V) | 220 / 240 |
| Input frequency (Hz) | 50 / 60 |
| Power consumption (W) | 3000 |
| Total Width (mm) | 850 |
| Total Depth (mm) | 770 |
| Total Height (mm) | 1950 |
| Net Weight (Kg) | 95 |
Additional Information
3D Printer Wasp 4070 HDP
The WASP 4070 HDP extruder is a high-definition, air-powered component that excels at extruding various types of thermoplastics, including standard, engineering, and recycled, from granules.
This component is specially designed to ensure efficient flow of thermoplastic granules with an impressive extrusion rate of up to 350 grams per hour. Its ability to work with granules makes it an economical and versatile choice for 3D printing, allowing for experimentation with different materials and lower costs than using traditional filaments.
The WASP 4070 HDP is a large-format 3D printer designed to print directly from granules, an application that offers economical and durable prints. This versatile printer is suitable for a wide range of industries, including specialty industries, research institutes, design studios, and even plastic recycling.
Its advanced features include an LED bar to monitor print status, a HEPA filter to ensure a clean environment, and a continuous air supply system for pellet supply. The printer has a 5-liter reservoir for granules and offers fast and powerful delta kinematics.
The 4070 HDP 3D pellet printer has been improved with new motor drivers to reduce noise and improve accuracy. The mechanics have been enhanced with the introduction of lighter carbon arms and a new safety glass door. The user experience is made more intuitive with a 7-inch TFT touch display and an LED bar indicating the working status.
The printer features an active hot chamber, made of metal and thermoacoustically insulated, with temperature control up to 50°C. The "Hot and Cold Technology" feature ensures optimal printing of standard, technical and recycled thermoplastics.
With network connectivity, the WASP 4070 HDP can be managed remotely via mobile devices or computers. It is equipped with a camera to monitor the printing process remotely and can take advantage of remote assistance from WASP technicians.
Another innovation is the VAC vacuum printing platen retention system, which enables quick platen replacement and prevents unwanted micro-movements during printing. The VAC also supports the use of different types of printing plates depending on the materials used.
With a large print area of up to 400 x 600 mm and a maximum extruder temperature of 280°C, this printer is suitable for large prints using granules, which are considerably cheaper than traditional filaments. It also offers the possibility of experimenting with custom recycled materials.
Using a capacitive sensor, the printer automatically detects the presence of material and draws it from a 5-liter main tank, ensuring continuous production. With automatic platen leveling via the MESH system and remote monitoring capability via the on-board camera, the WASP 4070 HDP is an excellent choice for large-scale 3D printing projects with granules.
Reviews
No customer reviews for the moment.