Italiano 
There are no more items in your cart
Elegoo Neptune4 Pro FDM 3D Printer 225 x 225 x 265 mm
€299.18
The Neptune 4 Pro achieves up to 500 mm/s thanks to Klipper motherboard and 1.5 GHz quad-core ARM 64-bit processor, ensuring speed and efficiency. Preinstalled Klipper firmware simplifies startup. Supports input shaping to eliminate defects and pressure advance for precise extrusion and fewer problems.
Dual direct drive extruder is key for uniform extrusion, weighing 75% of Neptune 3 Pro. 5.2:1 ratio and dual-gear design ensure firm grip and prevent slippage. Bimetallic copper-titanium throat tube with unique design improves heat dissipation.
Neptune 4 Pro features intelligent segmented plane for efficiency and protection. PEI magnetic platform with coating and steel foil improves adhesion and deformation prevention.
Elegoo Neptune4 Pro
Desktop 3DPrinter 225x225x265 mm
Dual-Gear Extruder
Dual-gear 5.2:1 direct extruder, bimetallic throat tube, and air duct design that improves extrusion.
Efficient Heat Dissipation
Double-sided 4015 cooling fans and 4 blowers 4020 behind print head.
LCD screen 4.3"
Fixed or portable 4.3-inch touchscreen, pattern preview, print pause function.
Auto-Level
Automatic 121-point leveling and magnetic PEI printing plate for easy pattern removal.
Key Features 3D Printer Elegoo Neptune4 Pro
FDM printing technology
Print volume 225 x 225 x 265 mm
Print resolution ±0.1 mm
Printing speed 500 mm/s
Klipper Firmware
Neptune 4 Pro printer prints fast thanks to Klipper motherboard and 1.5G quad-core 64-bit ARM processor, with pre-installed firmware. Supports input modeling and pressure feed to improve print quality.
LCD touchscreen 4,3"
Removable 4.3-inch capacitive touchscreen can be handled by hand or attached to the base, with pattern preview and print pause. LED light strip and light on the nozzle to observe printing in dark environment.
Dual-Gear Direct Drive
The 3D printer is equipped with a double-gear extruder for constant extraction with a reduction ratio of 5.2:1. It has a bimetallic throat tube for heat dissipation and reduced tip plugging.
PEI magnetic platform
The 3D printer has a PEI magnetic platform with special coating and spring steel plate for good adhesion and resistance to deformation. The 250W hotbed can heat up quickly to 110°C, allowing easy removal of printed models.
Improved Cooling
For fast, omni-directional cooling of newly deposited models, Neptune 4 Pro has two thick 4015 ball blowers on each side of the printhead and four 4020 ball blowers behind. The system avoids problems such as warping.
Auto-livellamento
Automatic 121-point leveling ensures fast and accurate platform alignment. Knobs under the platform assist with first printing. PEI magnetic platform facilitates easy removal of templates.
ELG-NEPTUNE4P
Data sheet
| Configuration | Cartesian |
|---|---|
| Printing Technology | FDM |
| Printing Width (mm) | 225 |
| Printing Depth (mm) | 225 |
| Printing Height (mm) | 265 |
| Printing Resolution (mm) | ± 0,1 |
| Positioning accuracy X/Y (mm) | 0,0125 |
| Positioning accuracy Z (mm) | 0.002 |
| Extruder number | Single |
| Print Speed recommended (mm/s) | 500 |
| Support filaments | PLA / ABS / PETG / TPU / WOOD / Nylon |
| Ambient Operating Temperature (°C) | 8 / 40 |
| Operational Nozzle Temperature (°C) | ≤300 |
| Operational Hot Bed Temperature (°C) | ≤110 |
| Reading code | GCode |
| Input formats | .OBJ / .STL / .AMF |
| Connection mode | LAN / USB |
| Input voltage (V) | 110 / 220 |
| Input frequency (Hz) | 50 / 60 |
| Total Width (mm) | 475 |
| Total Depth (mm) | 445 |
| Total Height (mm) | 515 |
| Net Weight (Kg) | 8.3 |
Reviews
No customer reviews for the moment.